How to deal with Sodium silicate equipment emergency cut-off problems

Sodium silicate equipment once up and running, are not allowed to stop during the production, the reason is that begin to dissolve paohuajian if stopped mixing coagulation, cause cannot be discharged liquid raw materials, and once all will not discharge of solidification, the damage caused by very large, light will because all solidification need artificial a week's time to clean up. Or as a direct result of Sodium silicate equipment scrapped. As the user should be how to prevent this happen?

First you must make sure your local power supply. If there is a need power outage situation, must notify in advance, to make the corresponding production plan adjustment. And if there is a blackout accident happened sometimes, you need to use standby generators. Had better be yourself ready to have the generator, if there is no can contact good generator rental business in advance, for temporary needs to be a hindrance. If no generator outage situation, on the one hand to quickly to find where can have rent generator rental generators. On the other hand need to manually turn the pulley, Sodium silicate equipment is in a state of rotation. To prevent the adhesion of the state. At this time to make sure the motor rotation Sodium silicate equipment has been blackouts, which means the power switch has been close to death. Prevent the workers in the process of rotation, suddenly calls cause personnel injury.