Sodium silicate equipment production process it is very important to prevent splashing

Sodium silicate equipment production paohuajian need to rely on their own after the discharge pressure. In the process of emissions will produce a lot of pressure, caused by the impact of the strong, under the impact of this, the liquid paohuajian will splash out part of the very small liquid. This liquid is mainly liquefied very tiny paohuajian. Because the paohuajian has certain viscosity, and will itself with a certain temperature. So if the liquid falls to the human and livestock, has certain harm to the skin. If the liquid falls on the car or clothes, can cause pollution, fell on the ground will make the ground with a sticky, so the people go to have feeling sticky feet above. For the operation of the workers and will bring a lot of inconvenience to daily life. So we will come up from the source to eliminate the splash. So if to cure these small splash problem:

First, we need to understand how these splash is produced? Usually these splash liquid because paohuajian equipment internal pressure is higher. Let the liquid has a huge impact, so 

the impact of the direct hit a tank, can cause a lot of small splash. Because of this characteristic, we will reduce the impact of the liquid. And for a certain number of seal. 

One way to reduce the impact is increasing the diameter of the discharge pipe. Pipe expansion of 76 to 108, even 200 pipe. This fluid through the pipe when the impact is not so strong. Will also reduce the splash.

In addition, a more effective way is to use the buffer tank. Buffer after liquid naturally into the tank, so will not produce a lot of splash, and gas drainage, gas to rejoin the water inside, is fundamentally eliminate the splash of a problem.