sodium silicate plant

Product

words

Contact us

Jinan Jiuzhou Longyuan Energy Saving Equipment Co., Ltd.

Tel: 0086-531-87185178

Fax: 0086-531-87023636

Office: District of Jinan City, Shandong Construction Road No. 86

Factory Address: Jinan Zhangxia Shuilongwang town industrial park

E-mail: 13969078731@139.com

Customer Service QQ: 294746236

Post Code: 250002

Website: www.waterglasscn.com

                www.greatwater.cn


Sodium Silicate Chain Plate Molding Machine

Your current location: Home >> Product >> Sodium silicate paohuajian chain plate

Sodium Silicate Chain Plate Molding Machine

  • category:Sodium silicate paohuajian chain plate

  • The number of clicks:
  • Release date:2016/09/05
  • Online Inquiry
Details

水玻璃泡花碱链板机

Solid Sodium Silicate Chain Plate Molding Machine

 

Introduction:

Sodium silicate chain plate molding machine is an ideal cooling production process equipment with high efficiency, less drain and less pollution. In the process of production, sodium silicate flows through discharging mouth, then on the chain plate molding machine. The solid sodium silicate will be in favor of package, transportation, storage and high efficient subsequent dissolution.

 

Basic technical parameters:

Item

Main Technical Parameters and Performance Indicators

 Molding Products

     sodium silicate lump

 Product Geometry

   rectangular   platform: 45 /45× 10/10 × (26-30) mm

    Power

       4-11KW, 380V, 50HZ

Delivery  Capacity

          1-5t / h

   Length

           9m - 30m

   Width

          500-1000 mm

 Installation Angle

             0-15 °

 Cooling Type

     water cooling circulation

 Delivery Speed

          Adjustable 

Application and Control:

1. Installed under discharge mouth, height from discharge mouth to blanking point is 1150-2600mm (changed as the concrete site and temperature)

2. Running speed can be with variable frequency control and can be adjusted according to the amount of outflow.

 

Advantage:

1.     Less Drain: Product loss is more than 3% in water quenching method, such as an annual output of 25,000 tons of sodium silicate, loss equals about 30 thousand dollars; while product loss for chain plate molding machine can be as low as 0.01%.

2.     Less waste water, less pollution: Large amounts of cooling water in the original water quenching method, causing great pollution to the environment, the PH value of discharging water is greater than 10 or more, while for the chain plate molding machine, cooling water is cyclic utilization in the bottom of the chain plate.

3.     Higher product quality: Final product is not direct exposed with water, thus improving the quality and purity of the final product.

4.     Better utilization: molding product with applicable outline, high transparency and uniformity, in favor of package, transportation, storage and high efficient subsequent dissolution.

Note:

1. Inversion is banned under any circumstances.

2. Lubricants or grease is used for the lubrication of bearings, checked and lubricated every 3-4 months.

3. Machine oil is used for lubrication of chain; Lubricating at least once per shift, viscous degree of oil can be adjusted according to the different seasons.

4. Operating status of the conveyor chain should be checked frequently. Once chain plate pitch is found to increase, tensioning device should be taken the appropriate adjustments to maintain normal operation.


Related Tags:Sodiumsilicatechainplatemoldingmachine,sodiumsilicateconveyor

Previous:no
Next:Solid Sodium silicate Conveyor

Recently Viewed:

Related Products:

related news:

share
Welcome
Please enter the message content here。
name
name
phone
phone